Wanzhong x30J torsion shear wrench is suitable for m16-30 six national standard torsion shear bolts

扭剪扳手主要是終緊扭剪型高強螺栓的，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。

The torsion wrench is mainly used for final tightening of torsion shear high-strength bolts, and its purpose is to break the plum blossom head of the torsion shear high-strength bolt. When working, align the wrench head with the bolt head, press the switch to start working. After a few seconds, the bolt ring head will be twisted and broken. Then, pull out the wrench and pull the trigger to eject the ring head, which ends the work.

感謝您的閱讀，此文的文章來源:扭剪螺栓專用扳手更多的內容和問題請點擊:  http://cnbeilibao.com我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is the wrench for torsion shear bolts. For more information and questions, please click on: http://cnbeilibao.com We will continue to work hard to provide you with services. Thank you for your support!